Portal
Forum
Login
Register
Search
Contact
Images
Videos
Web Control
Forum ‹ Members section ‹ Show your controller ‹ New build.
New build.
Post Number:#121
Thu Jan 29, 2015 9:05 am
Thu Jan 29, 2015 9:05 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: 
National Flag:
Yes I have a female RJ45 on my dosing pump box and made a cable to connect, plus line to bring 12 volt to dosing pump.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#122
Sat Jan 31, 2015 12:30 am
Sat Jan 31, 2015 12:30 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
Hi Fernando, I was wondering if I could use a data logging shield for sd card in stead of tft as I want to make a small enclosure for the display. 
-------------------------------- Last edited Fri Jan 30, 2015 10:02 pm --------------------------------
four dosing pump setup will eventually be 6 pumps.
-------------------------------- Last edited Fri Jan 30, 2015 10:02 pm --------------------------------
four dosing pump setup will eventually be 6 pumps.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#123
Sat Jan 31, 2015 8:05 am
Sat Jan 31, 2015 8:05 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Hi!
Is more easy leave a hole for SD card like this:
Best regards.
Is more easy leave a hole for SD card like this:
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#124
Sat Jan 31, 2015 8:11 am
Sat Jan 31, 2015 8:11 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
good morning Fernando, ok I will change where I was going to mont the screen, can you tell me what float switchs go where I thought that there was picture with diagram but I cannot find it I have looked all over the forum and don't see it anywhere?
and are my pichters posting at a better size now?
and are my pichters posting at a better size now?
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#125
Sat Jan 31, 2015 8:15 am
Sat Jan 31, 2015 8:15 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
On Portal have a block with many links search for "Where to start?" and you'll see the link for part list.
No, the images are small and now are duplicated.
No, the images are small and now are duplicated.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#126
Sat Jan 31, 2015 8:19 am
Sat Jan 31, 2015 8:19 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
I tried to delet some of them. I will check parts list.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#127
Sat Jan 31, 2015 8:24 am
Sat Jan 31, 2015 8:24 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
If you need help to resize images PM me.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#128
Sat Jan 31, 2015 8:27 am
Sat Jan 31, 2015 8:27 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
I think float switchs 1 and 2 are for the sump, 3 and 4 goto ATO res and where do 5 and 6 goto?
I resized to 1028x768 with format factory, should size be different?
I resized to 1028x768 with format factory, should size be different?
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#129
Sat Jan 31, 2015 8:32 am
Sat Jan 31, 2015 8:32 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#130
Sat Jan 31, 2015 8:40 am
Sat Jan 31, 2015 8:40 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
thank you. Most of my pictures are with a web cam, I will check the setings when I get home.
What are switch 5 and 6 used for?
What are switch 5 and 6 used for?
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#131
Sat Jan 31, 2015 9:44 am
Sat Jan 31, 2015 9:44 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Are used on tanks, I have two. Is to detect leaks.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#132
Sat Jan 31, 2015 10:05 am
Sat Jan 31, 2015 10:05 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
Ok I see thank you for clarification.
-------------------------------- Last edited Sat Jan 31, 2015 7:10 am --------------------------------
What kind of solenoid do have on your setup, they do not have metal?
-------------------------------- Last edited Sat Jan 31, 2015 7:10 am --------------------------------
What kind of solenoid do have on your setup, they do not have metal?
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#133
Sat Jan 31, 2015 10:26 am
Sat Jan 31, 2015 10:26 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Can be any model used for washer clothes. It's for fresh water so, no problem.
The mine is in serie with a float valve. Redundancy never is too much.
The mine is in serie with a float valve. Redundancy never is too much.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#134
Sat Jan 31, 2015 10:40 am
Sat Jan 31, 2015 10:40 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
I would have never thought about using a washer valve, I was always looking for solenoid ball valve.
-------------------------------- Last edited Sat Jan 31, 2015 7:47 am --------------------------------
Ok I see thank you for clarification.
-------------------------------- Last edited Sat Jan 31, 2015 7:47 am --------------------------------
Ok I see thank you for clarification.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#135
Sat Jan 31, 2015 10:53 pm
Sat Jan 31, 2015 10:53 pm
Posts: 60
Topics: 3 Images: 0 Solve rating: 1 Joined: Sun Jun 15, 2014 11:50 pm Topics: 3
Age: 56 Gender: 
National Flag:
Is the green board in the picture a separate pcb for the atlas stamps? in post #111
Dale
Dale
Hi!
If the probes are on sump, maybe you have problem of electric noise.
Check page 10 of this datasheet: http://atlas-scientific.com/_files/_dat ... asheet.pdf?
So, you need of galvanic isolator: http://atlas-scientific.com/product_pag ... r-iso.html
I did a small shield to place this isolator.
Image: http://www.ferduino.com/forum/gallery/image.php?album_id=11&image_id=258
I sent the project to Sueur Aurelien and he bought 10 PCB's, send a PM to him and ask if can sell a piece for you.
Best regards.
If the probes are on sump, maybe you have problem of electric noise.
Check page 10 of this datasheet: http://atlas-scientific.com/_files/_dat ... asheet.pdf?
So, you need of galvanic isolator: http://atlas-scientific.com/product_pag ... r-iso.html
I did a small shield to place this isolator.
Image: http://www.ferduino.com/forum/gallery/image.php?album_id=11&image_id=258
I sent the project to Sueur Aurelien and he bought 10 PCB's, send a PM to him and ask if can sell a piece for you.
Best regards.
Post Number:#136
Sat Jan 31, 2015 11:56 pm
Sat Jan 31, 2015 11:56 pm
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
I don't have one yet but yes it is to help with electric noise, It has an atlas ISO chip one it.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#137
Sun Feb 01, 2015 5:43 am
Sun Feb 01, 2015 5:43 am
Posts: 70
Topics: 12 Images: 3 Solve rating: 0 Joined: Tue Oct 28, 2014 11:06 am Topics: 12
Age: 45 Gender: National Flag:
Why do we need that? And do we also need that if one only wants to use 1 atlas ph stamp?
Post Number:#138
Sun Feb 01, 2015 8:27 pm
Sun Feb 01, 2015 8:27 pm
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
It helps to isolate any electric noise coming from pumps and other items in the water, if you do not have that issue then it is not need.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#139
Tue Feb 03, 2015 1:25 am
Tue Feb 03, 2015 1:25 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
Hi Fernando it says level on the home screen, what is that tracking because no matter what I do it is always low.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#140
Tue Feb 03, 2015 8:44 am
Tue Feb 03, 2015 8:44 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Hi!
For default code the normal status is this:
If you want change the function look to tab "parametros" on "void check_nivel()".
Best regards.
For default code the normal status is this:
If you want change the function look to tab "parametros" on "void check_nivel()".
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Return to Show your controller
Who is online
Users viewing this topic: AhrefsBot [Bot] and 2 guests