Hi,
I change format sd card for FAT.
I uncomment and comment this line in code:
// Uncomment the line below if you have the SD card on ethernet shield.
//#define USE_PIN_4_FOR_SD_CARD // Descomente esta linha se você tem o cartão SD conectado no "ethernet shield".
// Uncomment the line below if you have the SD card on TFT
// Do not uncomment this line when using Ferduino Mega 2560
#define USE_PIN_53_FOR_SD_CARD // Descomente esta linha se você tem o cartão SD conectado no TFT. Não descomente esta linha se estiver usando um Ferduino Mega 2560
But no evolution, I have the same problem. The same message "please insert a SD card"
I formated sd card whith windows.
Regards.