but serialprint not need to write the messages on the display?

I can not understand how I should set up the command

sorry but not really what I wanted, perhaps I have not explained well

I wish that the power of ferdiuno must go directly to the screen wavemaker

without touching the touchscren

thanks

hi

I would like to set the home screen directly wavemaker why use only one function

how can I do?

thanks

I did many tests but I can not do this function

please help me?

Could you help me?

thank you

sorry I can not understand where I enter the Serial.println

Could you help me I did some tests but I do not work

thank you

hello Fernado

I wanted to know if it was possible to create a way of wavemaker pumps alternated in this way

Pump 1: 0
pump 2: 0 to max then returns to 0

pump 1: 0 to max then returns to 0
pump 2: 0

and so on ....

I can not create the code

[ITA] Simone, non può essere :D quel valore può essere un intero qualsiasi, quindi non può cambiare se metti 20 o 35. Cerca il problema da qualche altra parte! [/ITA] It can't be... search for the problem somewhere else! [ITA] devi aggiugnere una { ( parentesi graffa aperta ) dopo if(myTouch.dataAv...

many thanks

because if I put more time as 30 seconti does not work?

ok thanks I get

I do not work. I made the changes you told me is on the home screen and never changes

these are my codes

https://drive.google.com/file/d/0B1EU3g ... sp=sharing

thanks

but it does not work also spent a lot of time does not change the time of day display

thanks

Could you give me some help? I can not figure out which ones you posted

thanks

thank you very nice

they had seen the codes that I have linked, but I can not understand are not very experienced

I might have some more information?

thank you kindly

I am trying to use your example code ferduino which function should I use to insert in the LOOP to make sure that if you do not touch the screen I have to display the time because in this instance I am if((millis() - previousMillis_1) > 5000) { if((millis() - previousMillis_2) > interval * 1000) { c...

the bridge pin 13 to pin 10 which do not right?

and even to remove the pins 50, 51, 52 and 53 of the TFT shield

like this guide?


viewtopic.php?f=24&t=36

probes are new


if I want to use the code ferduino webcontrol without the network adapter that changes should I make to the code?

thanks

resistance should be close to Arduino or makes no difference?

but I have to connect 2 wires to the temperature sensor? as shown in the diagram?

data and + gnd only?