It helps to isolate any electric noise coming from pumps and other items in the water, if you do not have that issue then it is not need.

I don't have one yet but yes it is to help with electric noise, It has an atlas ISO chip one it.

I would have never thought about using a washer valve, I was always looking for solenoid ball valve.

-------------------------------- Last edited Sat Jan 31, 2015 7:47 am --------------------------------

Ok I see thank you for clarification.

Ok I see thank you for clarification.

-------------------------------- Last edited Sat Jan 31, 2015 7:10 am --------------------------------

What kind of solenoid do have on your setup, they do not have metal?

thank you. Most of my pictures are with a web cam, I will check the setings when I get home.

What are switch 5 and 6 used for?

I think float switchs 1 and 2 are for the sump, 3 and 4 goto ATO res and where do 5 and 6 goto?
I resized to 1028x768 with format factory, should size be different?

I tried to delet some of them. I will check parts list.

good morning Fernando, ok I will change where I was going to mont the screen, can you tell me what float switchs go where I thought that there was picture with diagram but I cannot find it I have looked all over the forum and don't see it anywhere?
and are my pichters posting at a better size now?

Hi Fernando, I was wondering if I could use a data logging shield for sd card in stead of tft as I want to make a small enclosure for the display. :-? -------------------------------- Last edited Fri Jan 30, 2015 10:02 pm -------------------------------- http://www.ferduino.com/forum/gallery/image.p...

Yes I have a female RJ45 on my dosing pump box and made a cable to connect, plus line to bring 12 volt to dosing pump.

I had some issues with voltage from there. For some reason the voltage was not stable and was causing IP address to change at random as soon as I connected as I have it now alll my IP issues stopped.

Yes, I had some thing else going on. The way mine is set up now is 6 volts on vin on db25 and all is stable. I will not set 12 volts to the board it gets hotter than I like, so yes I power board and relays with 6 volts and, dosing pumps with 12 volts all from the computer power supply. I do not have...

Hi Fernando I look into that for the images, as for motors I want them to be easy to take out in case of problems.

also double check your power at the shield, I was getting low voltage to the TFT all together I now use VIN from db25 with 6 volts and it works every time.

Let me know when you have a preorder I will get one board

-------------------------------- Last edited Wed Jan 28, 2015 4:09 am --------------------------------

Let me know when you have a preorder I will get one board

I sent a pm to find out if Sueur has any to sell.

Hi Fernando, I connected 12 volt to brown wire from RJ45 for dosing pumps and all the strange issues I was having with my net settings went away it is working consistantly now, Iam building the box for my dossing pumps and will post some pics when it's done, my PH and ORP readings seem to very errat...

All is working now, I need to get this up to my tank after I do some clean up and finishing touches.

yes must be 2 GB max that was alot of issue I had been having. I treied a 4 GB card and had IP issues.