Hi!

Welcome Denis!

You're thinking in use 2 Ferduino still?

This LEDs have how many channels?

Best regards.

Hi!

You can control 2 pumps with each PWM pin using a circuit as this:



Best regards.

Hi!

I'm asking because if you have this shield no need of TFT shield.

Why not buy the kit v1.1 with RTC?

Best regards

Hi!

You can but maybe you will need of more resistance.

No matter because the voltage never will be higher than 3.3V.

Best regards.

Use this tool to put image up to 1280 x 1024.



You bought this shield?

Arduino Due / Mega Screw Shield with TFT connector & RTC

This model is to Arduino Uno.



You bought the shield of the first post?

Hi!

Frank, your link is wrong.

Best regards.

Hi!

Ricard I was talking about this conjunct.

I changed the image while you was answering.

Sorry.

Best regards.

Hi!

Ricard you're doing a great work!


What system you are using to fix this conjunct on panel?




Best regards.

Hi!

Check this topic: Part list

Best regards.

Hello!

Welcome Tony!

Ferduino is incompatible with ITDB32S.

The resolution should be 400 x 240 pixels.

Best regards.

Hi! Simone, You can use any model of RTC without any other I2C device on board. Henning's library NOT support 2 or more I2C devices on same channel like this model: http://www.emartee.com/Images/websites/emartee.com/back-1.JPG Here a model that you can use: https://cdn.sparkfun.com//assets/parts/9/2...

Hi!

Welcome Donato!

On SD card is stored only some files .txt, 1 or 2 GB is enough.

Best regards.

Hi!

Understood.

Something as this but, with aluminium.



Best regards.

Hi!

Welcome Ricard!

This height is enough to heatsink + LED + lens + coolers?



You'll put some protection for LED's as glass or acrylic?

Bes regards.

Hi! Thank you for all! I hope that all work fine as designed. :-ss Garry, on moment I haven't informations about time and price. The functions are all implemented on ferduino code up to now and energy monitor that will be done. More details you can find here: http://ferduino.com/products/ Hug!

Hi! Is possible still use this router as a shield with a small "technical adaptation". http://hackanerd.files.wordpress.com/2013/07/img_0161.jpg More details here: How to make a simple Arduino wireless shield I think that the option to connect the GROUND wasn't the better. The board have m...

Welcome Frank! You can use this shield. Here have an example of the ferduino working with it. https://lh5.googleusercontent.com/-im_S-fBtK3o/UXHgCf0uoJI/AAAAAAAAAxg/srUbxnmBKNA/w426-h320-no/20130419_194332.jpg Looking to the manual you'll notice that the touch use the pins A8 until A12. http://shop....

Hi!

I received the first images of the PCB.






Keep patience.


Hug!

Very cool!