Thank you Fernando

The communication will spend more time. Change the baud rate of your stamp it wil be done just one time.

the problem was the JSON library have completely rebuilt the Arduino IDE and created everything as in the video and lo and behold!

watching... :D :D -------------------------------- Last edited Wed Dec 12, 2018 8:15 pm -------------------------------- [quote=" Gordon Lehmann » Today 3:36 pm ":82204mjv]I mean it to control need to use Adafruit code! I’ve wrote wrong code But I must learn c++ to know how combine code...

Hi! Welcome Jorge! This problem with SD card is not related to Arduino IDE version. Firstly there's no compiling errors, there's only warnings. Warnings can be ignored. Ferduino code can work with IDE 1.8.7 but you will see warnings in anyway. You should make first your SD card work with examples....

Hi! This are random values that I have selected. It can be any number. It's to know if configuration of some parameter were saved in EEPROM sometime. If the value never was saved this default values will be used. I'm not a monster don't need ask with all this fear. Best regards.

thank you. problem solved. thanks.

Hi! Not, the V4.x is an obsolete version and was replaced by EZO. I'll close this topic since the questions were answered. If needed please create a new topic. Best regards.

Hi! Just swap the pin numbers. Example: const byte wavemaker2 = 46; const byte temporizador1 = 80; Change to: const byte wavemaker2 = 80; const byte temporizador1 = 46; Best regards.

Good news Fernando, I change the card and the worked! Best regards

Just connect the RTC to pins 18 and 19 then select the pins on code.

There's nothing to change on code when using WiFi. The meaning of this line: #ifndef USE_ESP8266 Is: If not defined USE_ESP8266 In others words if not using ESP8266 then... You should set static IP in router settings.

Check the IP of your NodeMCU in your router page then type the address on browser to access ESP-link interface.

The initial issue was solved. I will close this topic for now.

Fernando, i have good news! I change my TFT Shield from mega Shield v1.1 to mega Shield v2.2 and total sucess! Open start screen in First time. I think my old TFT Shield have been problem. Please close this Topic.

Thank you Fernando for quick repost! I don't use your code, but change that code for example: Urtouch Calibration e Urtouch button test, in line: #Define Touch orientation Landscape In both codes from Portrait for Landscape. Finally allright!! :ympeace: :ympeace: :ympeace: You can close this topic.

Hi! Just double check the changes that you did after get it working. If it worked before you did something wrong. Best regards.

Hi! Not, only Atlas stamps are compatible. Best regards.

Glad to hear! The initial problem was solved. Please create a new topic to this problem after a search. I'll close this topic.

Hi! Welcome Sidney! To inverse the signaling do I have to swap the nivel_status1 values true and false? Not, change the logic of < and > . I was also wondering if there's a failsave mechanism if the float sensor in the reef is broken? I'm a little bit afraid that if the sensor is stuck the...

Learn is more important anyway I won't make your job.

perfect. thank you so much

Hi, yes I found that out after some searching on their side of things, so I did as you suggested with copy and paste but it has to be highlighted Ctrl+c and Ctrl+p, there is nothing when I do right click on the code from forum.

thank you for your time. Best regards. #:-s