RF controller

[Nicolas Roux]

Hi here are the results I get with the code

[Fernando Garcia]

Where is the result?

-------------------------------- Last edited Sun Mar 12, 2017 4:45 pm --------------------------------

Well, I think you are talking about this image:

The communication is working, try change this values in test code:

Code: Select all

// Values for test purpose
byte bled_out = 255;
byte wled_out = 255;
byte rbled_out = 255;
byte rled_out = 255;
byte uvled_out = 255;
byte moonled_out = 255;


[Diztly Wardizt]

halo fernando.

i can not find this modul http://www.anarduino.com/miniwireless/in ebay, can you give me alternatif to this modul with i pay in ebay online store. I have difficulty when purchasing outside ebay.

thanks

[Fernando Garcia]

Hi!

I bought here: http://www.ebay.com/itm/181573220835

Buy at least 2 pieces to make tests otherwise you will get crazy trying find problems.

Best regards.

[Diztly Wardizt]

Fernando Garcia » Thu Mar 16, 2017 9:28 pm wrote:

Hi!

I bought here: http://www.ebay.com/itm/181573220835

Buy at least 2 pieces to make tests otherwise you will get crazy trying find problems.

Best regards.

Many thanks Fernando. For share links.


-------------------------------- Last edited Sun Mar 19, 2017 9:31 am --------------------------------

Fernando Garcia » Sat Mar 21, 2015 6:03 am wrote:

Hi!

I'm working in a new feature to Ferduino Controller.

I did a small board to control LEDs or relays.

Image: http://www.ferduino.com/forum/gallery/image.php?album_id=11&image_id=313

This board will be plug and play to my relay or LDD board.

Best regards.

Sorryyy brother, can I get this schematic.

Thanks.

[Fernando Garcia]

Hi!

My board is basically an Anarduino connected to a PCA9685.

How many devices or LED channels do you want control?

The Anarduino has 6 PWM pins available and others digital and analog pins.

If do you want more than 6 PWM pins only buy a PCA9685 and connect to you Anarduino.

Best regards.

-------------------------------- Last edited Sun Mar 19, 2017 12:09 pm --------------------------------

Anarduino schematic:

http://www.anarduino.com/miniwireless/m ... ss-sch.jpg

Here RTC and external flash memory are not needed.

PCA9685 schematic:

https://cdn-learn.adafruit.com/assets/a ... _schem.png

[Fernando Garcia]

Hi!

After long time I'm revisiting this subject.

The PCB is ready now I have to place the components.

Best regards.

[Nicolas Roux]

salut alors ce module fonction on peu en savoir plus
with hi translation then this function module can be read more:)