Ferduino for laypeople

[Andre Carvalho]

Good people

wanted to build a controller but I do not know anything about electronics !!! I have a mega arduino to start building the hardware but though I have already tried to decode the photos of the circuits I could not get anything .If I could make a controller scheme hi will thank you.

Something like this:

thank you guys

[Fernando Garcia]

Hi!

Welcome André!

I'm sorry but I have zero patience to work with Fritzing. Maybe other user can help.

For now to start you can try find the schematics on Google images. Try this: DS18B20 + Arduino + Fritzing

Here a sample:

In my case I'm using DS18B20 in parasite mode, so the 5 V is not connected directly to it.

The VCC (or VDD) can be unconnected or connected to GND like this:

Obviously you have to pay attention in Arduino pins, In this case the digital pin is 49. You can see the pin number on code: https://github.com/FernandoGarcia/Ferdu ... a.ino#L203

Best regards.

[Andre Carvalho]

Hy fernando

I needed a connection scheme for the various components. It can even be drawn by hand.
When ferduino plates are planned?