Portal
Forum
Login
Register
Search
Contact
Images
Videos
Web Control
Hello Fernando,
you can tell me what are the pins of the SD Card?
I have:
SD_Out to pin 50
SD_SCK to pin 52
SD_DIN to pin 51
SD_CS to pin 53
this is right?
Best regards
Norberto Pinheiro
Forum ‹ Members section ‹ DIY Ferduino controller ‹ SD card
SD card
5 posts
• Page 1 of 1
Posts: 24
Topics: 8 Solve rating: 0 Joined: Thu Nov 06, 2014 9:20 am Topics: 8
Age: 50 Gender: 
National Flag:
Post Number:#2
Fri Dec 19, 2014 9:33 pm
Fri Dec 19, 2014 9:33 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: 
National Flag:
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#3
Fri Dec 19, 2014 10:34 pm
Fri Dec 19, 2014 10:34 pm
Posts: 24
Topics: 8 Solve rating: 0 Joined: Thu Nov 06, 2014 9:20 am Topics: 8
Age: 50 Gender: National Flag:
Hi Fernando,
I tested with the code SD_CARD of this page and the result was:
Can't open
the card is 32 gb and this formatted
I tried with this:
SPI_FULL_SPEED,chipSelect
and this:
card.init(SPI_HALF_SPEED, ChipSelect_SD);
and the result as the same
you can help me?
Thanks in advance.
Norberto Pinheiro
I tested with the code SD_CARD of this page and the result was:
Can't open
the card is 32 gb and this formatted
I tried with this:
SPI_FULL_SPEED,chipSelect
and this:
card.init(SPI_HALF_SPEED, ChipSelect_SD);
and the result as the same
you can help me?
Thanks in advance.
Norberto Pinheiro
Post Number:#4
Sat Dec 20, 2014 8:53 am
Sat Dec 20, 2014 8:53 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 39 Location: São Paulo Gender: National Flag:
Hi!
The SD card should be of 1 or 2 GB.
Best regards.
The SD card should be of 1 or 2 GB.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#5
Mon Jan 26, 2015 8:14 am
Mon Jan 26, 2015 8:14 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 42 Location: Aurora Gender: National Flag:
yes must be 2 GB max that was alot of issue I had been having. I treied a 4 GB card and had IP issues.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
5 posts
• Page 1 of 1
Return to DIY Ferduino controller
Who is online
Users viewing this topic: No registered users and 1 guest