Hi Fernando I have my lights setup but I am having an issue, when 4 channels are on they will run at 100%, when I add the 5th channel the all go dim then offat 100%. Here are the specs.
SPECIFICATIONS:
Channel 1: EPISTAR ES-CADBV45P 45*45mil 4500K x 10 chips (32-34V @ 350mA-500mA)
Channel 2 : EPISTAR ES-CADBV45P 45*45mil 455nm Royal Blue x 10 chips (32-34V @ 350mA-500mA)
Channel 3 : EPILEDS EP-U4545K-A3 45*45mil 430nm Violet(UV) x 10 chips (32-34V @ 350mA-500mA)
Channel 4 : EPILEDS BH-R4242D-A1 42*42mil 660nm x 5 chips + Epistar ES--CADBV45P 490nm x 5 chips (27-29V @ 350mA-500mA)
Channel 5 : EPILEDS EP-U4545K-A3 45*45mil 410nm (32-34V @ 350-500ma
48 Volt
7.3 Amp
350 Watt
87.5% Efficiency
Meanwell 5 up board with ldd500h drivers