TFT with SD card+module ethernet (create file in SD)question [SOLVED]

[Marcos Junior]

Hi Again!

I have a tft shield with sdcard + module ethernet, i make de bridge from resistor 16 to pin4, and after upload a code to arduino i saw not any archive created in sdcard.
after, uploaded a code test EXEMPLE>SDFAT>GRAVAR_TEMPERATURA_SD and archive created.

in ferduino code i changed "card.init(SPI_FULL_SPEED, ChipSelect_SD)" to "card.init(SPI_HALF_SPEED, ChipSelect_SD)" and too not create any archive, but when change to "card.init(SPI_QUARTER_SPEED, ChipSelect_SD)" all files are created in SD.


this correct? or did something wrong?

[Fernando Garcia]

Hi!

If it's working with "SPI_QUARTER_SPEED" you haven't any problem. It's a particularity of your SD card.

Best regards.

[Marcos Junior]

Thx again Fernando!