Hi , my name is David.
Fernando, you are doing a fantastic work. Congratulations.
I began with arduino some time ago, with your first project.
My last project, (running perfect, except joy reef) was ferduino with web control but with the older ethernet shield, ENC28J60.
I have an arduino mega, one screw shield (green),one ethernet shield for mega ENC28J60, TFT shield with RTC (and SD slot), and TFT touch screen with resolution 400 x 240, like i said previosly all was running perfect , only problems with joy reef, the last web changes.
I choose upgrade to new project, ferduino with webcontrol, .I read all the topics, and I've follwed step by step.
First step, to buy the new ethenet shield, w5100.
Second step buy a 2 gb microsd card for the ethernet shield.
Third step the pins 10, 11, 12 and 13 are not plugged and a jump between pin 10 (ethernet shield) and pin 53 (arduino mega, in my case screw shield)
Fourth step, remove the tft shield pins 50,51,52,53.
Fiveth step, add the new libraries (base64,ethernet and spi) and modify other the like you say in the tutorial how to install ferduino with web control, also change in the program, the language, ds 1307 (20,21), the Utouch (6,5,4,3,2), and the SD chipselect = 4.
The web control runs fantastic, i connect with joy reef web page, runs very well.
But i notice a problem, when power on arduino mega, the displays show the init screen and after one second shows the password screen. If i touch the password, for example one number, the display stops, is frozen, and the comunications also stops. I need to restart the arduino and i can't touch the screen, that always saty in the password screen.
If i remove the ethernet shield(w5100) and i load the program Ferduino spanish-master, with the same libraries, runs perfect the display, by the way i have not internet connection.
Whats the problem Fernando? Can you help me please?
Thanks a lot .