Portal
Forum
Login
Register
Search
Contact
Images
Videos
Web Control
Here 2 pictures of my ferduino PCB (sorry for the poor quality).
Dosing pump
PH stamp
Float switch
T°
Working correctly
Relays 1 and 2
LED
Fan control
Not yet tested
Once again thanks for your help
Best regards,
Jean-Yves
Forum ‹ Members section ‹ Show your controller ‹ My Ferduino DIY
My Ferduino DIY
28 posts
• Page 1 of 2 • 1, 2
Post Number:#1
Mon Dec 15, 2014 4:58 pm
Mon Dec 15, 2014 4:58 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: 
National Flag:
Hello Fernando,
Here 2 pictures of my ferduino PCB (sorry for the poor quality).
Dosing pump
PH stamp
Float switch
T°
Working correctly
Relays 1 and 2
LED
Fan control
Not yet tested
Once again thanks for your help
Best regards,
Jean-Yves
Here 2 pictures of my ferduino PCB (sorry for the poor quality).
Dosing pump
PH stamp
Float switch
T°
Working correctly
Relays 1 and 2
LED
Fan control
Not yet tested
Once again thanks for your help
Best regards,
Jean-Yves
Post Number:#2
Mon Dec 15, 2014 5:07 pm
Mon Dec 15, 2014 5:07 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi!
Great job!
I think that someone is trying copy my Ferduino Mega
Do you are using the version with web control?
Can you tell me where found this float switches with long cable and temperature sensors with plastic isolation?
Best regards.
Great job!
I think that someone is trying copy my Ferduino Mega
Do you are using the version with web control?
Can you tell me where found this float switches with long cable and temperature sensors with plastic isolation?
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#3
Mon Dec 15, 2014 5:50 pm
Mon Dec 15, 2014 5:50 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Fernando,
No panic it's impossible to make a copy as perfect as your board.
I only did it for myself to simplify all the wiring.
I have to add that it's far away from the quality of your board but as I follow your project since the beginning I had all the required components that are now integrated in Ferduino board.
I am using Joy-reef but the function has not been tested with the board because I use an ENC28J60 as ethernet shield and I have ordered a W5100 to try with the new version of webcontrol.
Here is the ref. for float switch http://www.reef-ocean.com/produit/index/?pid=31335
Sorry but for the temp sensor I don't remember.
Best regards,
Jean-Yves
No panic it's impossible to make a copy as perfect as your board.
I only did it for myself to simplify all the wiring.
I have to add that it's far away from the quality of your board but as I follow your project since the beginning I had all the required components that are now integrated in Ferduino board.
I am using Joy-reef but the function has not been tested with the board because I use an ENC28J60 as ethernet shield and I have ordered a W5100 to try with the new version of webcontrol.
Here is the ref. for float switch http://www.reef-ocean.com/produit/index/?pid=31335
Sorry but for the temp sensor I don't remember.
Best regards,
Jean-Yves
Post Number:#4
Mon Dec 15, 2014 5:54 pm
Mon Dec 15, 2014 5:54 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
I was joking
Thanks for link. It's very expensive
.
Best regards.
Thanks for link. It's very expensive
.Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#5
Mon Dec 15, 2014 6:04 pm
Mon Dec 15, 2014 6:04 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
I understood.
Yes they are expensive.
For the temp sensor you can make an internet seach with " DS18B20 waterproof " you'll find some.
Best regards
Jean-yves
Yes they are expensive.
For the temp sensor you can make an internet seach with " DS18B20 waterproof " you'll find some.
Best regards
Jean-yves
Post Number:#6
Tue Dec 16, 2014 8:30 am
Tue Dec 16, 2014 8:30 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi!
I can find the probes but, not with good price.
You'll add some material to protect the copper surface of your board?
Best regards.
I can find the probes but, not with good price.
You'll add some material to protect the copper surface of your board?
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#7
Tue Dec 16, 2014 11:53 am
Tue Dec 16, 2014 11:53 am
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Hello
Yes I will protect the circuit with special varnish but I have first to modify the buzzer circuit ( don't know how ) that was made following the shematics provided in Ferduino Mega but I saw yesterday that there is a difference with the circuits in the forum.
Best regards,
Jean-Yves
Yes I will protect the circuit with special varnish but I have first to modify the buzzer circuit ( don't know how ) that was made following the shematics provided in Ferduino Mega but I saw yesterday that there is a difference with the circuits in the forum.
Best regards,
Jean-Yves
Post Number:#8
Tue Dec 16, 2014 1:37 pm
Tue Dec 16, 2014 1:37 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Don't worry.
The circuit will work fine with trimmer of 10K.
Best regards.
The circuit will work fine with trimmer of 10K.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#9
Tue Dec 16, 2014 2:12 pm
Tue Dec 16, 2014 2:12 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
OK thank you very much
Post Number:#10
Sun Apr 19, 2015 10:30 pm
Sun Apr 19, 2015 10:30 pm
Posts: 69
Topics: 18 Images: 2 Solve rating: 1 Joined: Tue Apr 14, 2015 11:54 pm Topics: 18
Age: 43 Gender: National Flag:
greetings Jean Watrelot.
I learn your your image board, pic no.2 http://www.ferduino.com/forum/gallery/image.php?album_id=28&image_id=231
there images that do not use arduino board, I want understanding the scheme.
sorry with google translate.
thx
Diztly.
I learn your your image board, pic no.2 http://www.ferduino.com/forum/gallery/image.php?album_id=28&image_id=231
there images that do not use arduino board, I want understanding the scheme.
sorry with google translate.
thx
Diztly.
Post Number:#11
Mon Apr 20, 2015 6:23 am
Mon Apr 20, 2015 6:23 am
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Hello Diztly,
Here is a side view of the assembly
This board was made to mount the different shield on it (from bottom to top you have arduino mega, ethernet shield ,diy shield, ITDB 02 shield and the TFT LCD ).
Basically its is the same shield but more complete that the one Fernando recommends in the part list ( the green one ).
Best regards
jean-yves
Here is a side view of the assembly
This board was made to mount the different shield on it (from bottom to top you have arduino mega, ethernet shield ,diy shield, ITDB 02 shield and the TFT LCD ).
Basically its is the same shield but more complete that the one Fernando recommends in the part list ( the green one ).
Best regards
jean-yves
Post Number:#12
Mon Apr 20, 2015 11:38 pm
Mon Apr 20, 2015 11:38 pm
Posts: 69
Topics: 18 Images: 2 Solve rating: 1 Joined: Tue Apr 14, 2015 11:54 pm Topics: 18
Age: 43 Gender: National Flag:
thank you for your replay, I think enough to be able to understand that you build. more images be better...
Post Number:#13
Sat Apr 25, 2015 5:25 pm
Sat Apr 25, 2015 5:25 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Hello Fernando ,
I have added some picture in my album, I will make a complete presentation later because the post that I had just prepared has disappeared from the forum and it is a lot of work to do it again.
Best regards,
Jean-Yves
I have added some picture in my album, I will make a complete presentation later because the post that I had just prepared has disappeared from the forum and it is a lot of work to do it again.
Best regards,
Jean-Yves
Post Number:#14
Sun Apr 26, 2015 10:14 am
Sun Apr 26, 2015 10:14 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi!
Great job!
I'm waiting to see more details.
Best regards.
Great job!
I'm waiting to see more details.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#15
Sun Apr 26, 2015 1:02 pm
Sun Apr 26, 2015 1:02 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Hello Fernando ,
Some short comments on the pictures of my Ferduino.
Stamps box
Inside of the box
Finished box
Dosing pumps box made from electrical trunking
All pumps installed
Box finished
Relays 1 box
For this, I used 2 multiple outlet modified so that each outlet is independent and controlled by relay( except one which is always powered ).
Here the 2 multiple outlet fixed in the box
In the second half of the box,I fixed the relays board and the step down converter used to power the relays and the 6v outlet for the ATO pump.
Hot wire for the relays
Hot wire installed
Just before closing the box with everything connected
Box finished
Ferduino box
Front view
Left side
Rear side
Right side
Cover
All together
Working Ferduino
Best regards,
Jean-Yves
Some short comments on the pictures of my Ferduino.
Stamps box
Inside of the box
Finished box
Dosing pumps box made from electrical trunking
All pumps installed
Box finished
Relays 1 box
For this, I used 2 multiple outlet modified so that each outlet is independent and controlled by relay( except one which is always powered ).
Here the 2 multiple outlet fixed in the box
In the second half of the box,I fixed the relays board and the step down converter used to power the relays and the 6v outlet for the ATO pump.
Hot wire for the relays
Hot wire installed
Just before closing the box with everything connected
Box finished
Ferduino box
Front view
Left side
Rear side
Right side
Cover
All together
Working Ferduino
Best regards,
Jean-Yves
Post Number:#16
Sun Apr 26, 2015 2:09 pm
Sun Apr 26, 2015 2:09 pm
Posts: 27
Images: 1 Solve rating: 1 Joined: Wed May 07, 2014 3:20 pm Age: 48 Gender: 
National Flag:
Very,very,very cool!
Post Number:#17
Sun Apr 26, 2015 2:45 pm
Sun Apr 26, 2015 2:45 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
An acrylic frame like this should be nice. 
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#18
Sat May 02, 2015 6:24 am
Sat May 02, 2015 6:24 am
Posts: 68
Topics: 2 Solve rating: 0 Joined: Thu Apr 10, 2014 7:59 pm Topics: 2
Age: 58 Location: Barbourville, Kentucky Gender: National Flag:
amazing work, looks very professional
Post Number:#19
Mon May 04, 2015 12:22 pm
Mon May 04, 2015 12:22 pm
Posts: 60
Topics: 3 Images: 0 Solve rating: 1 Joined: Sun Jun 15, 2014 11:50 pm Topics: 3
Age: 57 Gender: National Flag:
wow that looks great you did a really good job on the boards and also on the cases are the silk screened ? how did you do the lettering on the box's?
Post Number:#20
Mon May 04, 2015 2:34 pm
Mon May 04, 2015 2:34 pm
Posts: 30
Topics: 7 Images: 32 Solve rating: 0 Joined: Fri May 09, 2014 2:30 pm Topics: 7
Age: 66 Location: waremme Gender: National Flag:
Hello,
Thanks for the comments.
The boxes have been covered with transparent adhesive film.
The software used is Front Panel Designer from schaeffer ag.
http://www.schaeffer-ag.de/en/downloads ... _designer/
Very easy to use and freeware.
Best regards,
Jean-Yves
Thanks for the comments.
The boxes have been covered with transparent adhesive film.
The software used is Front Panel Designer from schaeffer ag.
http://www.schaeffer-ag.de/en/downloads ... _designer/
Very easy to use and freeware.
Best regards,
Jean-Yves
28 posts
• Page 1 of 2 • 1, 2
Return to Show your controller
Who is online
Users viewing this topic: No registered users and 0 guests