Portal
Forum
Login
Register
Search
Contact
Images
Videos
Web Control
Forum ‹ Members section ‹ Show your controller ‹ New build.
Have you tried fernandos test code for the network adapter (the one without the file for the sd card)
I tried this one, with an ip for my local network and it worked. Opening up a web browser and typing the ip of the controller in brought some basic info on screen.
Can you post your network config section of your code?
this is what you were talking about or do you mean the tab, also I am using ferduino mega 2560.
also test code did not work for me just came back with server at 0.0.0.0.
New build.
Post Number:#81
Tue Dec 30, 2014 4:09 am
Tue Dec 30, 2014 4:09 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: 
National Flag:
ok so at his point faith restored I have been running the ferduino for a week now with out messing with it and it has done well, I will be getting on my tank in the next few days, just got my 5up and driver board tonight next will be the 48v power supply I have managed to work with the code enough to add some my own little things and Fernando thank you so much for being a great teacher and helping when necessary.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#82
Tue Dec 30, 2014 10:09 am
Tue Dec 30, 2014 10:09 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi!
You're welcome.
Glad to hear.
Best regards.
You're welcome.
Glad to hear.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#83
Fri Jan 02, 2015 10:50 pm
Fri Jan 02, 2015 10:50 pm
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
hello Fernando!
how were your holidays?
how were your holidays?
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#84
Sat Jan 03, 2015 1:00 pm
Sat Jan 03, 2015 1:00 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi Christopher!
Happy New Year!
My holiday was very good, thanks.
I hope that your was too.
Best regards.
Happy New Year!
My holiday was very good, thanks.
I hope that your was too.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#85
Tue Jan 06, 2015 6:42 am
Tue Jan 06, 2015 6:42 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
Ok so I am still having problems with the network side of my controller but as for everything else it is working well. It is still coming up with a different IP than what is in the code, I have a 2gb memory card and have formatted with fat32, the TFT is hooked directly to the controller, I have tried to run the ethernet test code but I cannot get the html file to save to the card.
-------------------------------- Last edited Tue Jan 06, 2015 3:43 am --------------------------------
Ok so I am still having problems with the network side of my controller but as for everything else it is working well. It is still coming up with a different IP than what is in the code, I have a 2gb memory card and have formatted with fat32, the TFT is hooked directly to the controller, I have tried to run the ethernet test code but I cannot get the html file to save to the card.
-------------------------------- Last edited Tue Jan 06, 2015 3:43 am --------------------------------
Ok so I am still having problems with the network side of my controller but as for everything else it is working well. It is still coming up with a different IP than what is in the code, I have a 2gb memory card and have formatted with fat32, the TFT is hooked directly to the controller, I have tried to run the ethernet test code but I cannot get the html file to save to the card.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#86
Tue Jan 06, 2015 5:41 pm
Tue Jan 06, 2015 5:41 pm
Posts: 61
Topics: 11 Solve rating: 1 Joined: Thu Aug 28, 2014 9:27 am Topics: 11
Age: 44 Location: England Gender: National Flag:
Ok so I am still having problems with the network side of my controller but as for everything else it is working well. It is still coming up with a different IP than what is in the code, I have a 2gb memory card and have formatted with fat32, the TFT is hooked directly to the controller, I have tried to run the ethernet test code but I cannot get the html file to save to the card. .
Have you tried fernandos test code for the network adapter (the one without the file for the sd card)
Code: Select all
#include <SPI.h>
#include <Ethernet.h>
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(192,168,1,177); // Change the IP according to your local network
const byte SelectSlave_ETH = 53;
EthernetServer server(80);
void setup()
{
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial)
{
; // wait for serial port to connect. Needed for Leonardo only
}
// start the Ethernet connection and the server:
Ethernet.begin(mac, ip, SelectSlave_ETH);
server.begin();
Serial.print("server is at ");
Serial.println(Ethernet.localIP());
}
void loop() {
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
// output the value of each analog input pin
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
int sensorReading = analogRead(analogChannel);
client.print("analog input ");
client.print(analogChannel);
client.print(" is ");
client.print(sensorReading);
client.println("<br />");
}
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disonnected");
}
}
I tried this one, with an ip for my local network and it worked. Opening up a web browser and typing the ip of the controller in brought some basic info on screen.
Can you post your network config section of your code?
Post Number:#87
Wed Jan 07, 2015 12:41 am
Wed Jan 07, 2015 12:41 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
Code: Select all
boolean Ethernet_Shield = true; // Change to "false" if not an Ethernet Shield connected to the Arduino.
char *Username = "*********"; // Put here the user name registered in the joy-reef.comconectado the Arduino.
char *APIKEY = "*******"; // Stick the ApiKey generated by joy-reef.com
byte maxima_tentativa = 3; // Número máximo de tentativas de autenticação.
unsigned long intervalo_tentativa = 15; // Tempo de espera (em minutos) para novas tentativas.
byte mac[] = {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}; // Este MAC deve ser único na sua rede local.
byte ip[] = {192,168,0,140}; // Configure o IP conforme a sua rede local.
IPAddress dnsServer(8,8,8,8); // Configure o IP conforme a sua rede local. Este é o DNS do Google, geralmente não é necessário mudar.
IPAddress gateway(192,168,0,1); // Configure o "Gateway" conforme a sua rede local.
IPAddress subnet(255,255,255,0); // Configure a máscara de rede conforme a sua rede local.
EthernetServer server(9000); // Coloque aqui o número da porta configurada no seu roteador para redirecionamento.
this is what you were talking about or do you mean the tab, also I am using ferduino mega 2560.
Code: Select all
void processRequest()
{
char clientline[110];
char line[110];
char *requestString;
char *RequestString;
byte index = 0;
EthernetClient client = server.available();
uint8_t remoteIP[4];
IPAddress joyreef(178, 255, 75, 60);
client.getRemoteIP(remoteIP);
if (client)
{
Serial.print(remoteIP[0]);
Serial.print(".");
Serial.print(remoteIP[1]);
Serial.print(".");
Serial.print(remoteIP[2]);
Serial.print(".");
Serial.println(remoteIP[3]);
if(((remoteIP[0] == joyreef[0]) && (remoteIP[1] == joyreef[1]) && (remoteIP[2] == joyreef[2]) && (remoteIP[3] == joyreef[3])) ||
((remoteIP[0] == ip[0]) && (remoteIP[1] == ip[1]) && (remoteIP[2] == ip[2])))
{
while (client.connected())
{
if (client.available())
{
char c = client.read();
if (c != '\n' && c != '\r')
{
if(index < 110)
{
clientline[index] = c;
line[index] = c;
index++;
}
continue;
}
clientline[index] = 0;
line[index] = 0;
Serial.println(clientline);
if (strstr(clientline, "GET /"))
{
if(strstr(clientline,"?"))
{
//ignore any page request just look at the GET
requestString = strstr(clientline,"=") + 1;
(strstr(clientline, " HTTP"))[0] = 0;
RequestString = strstr(line,"=") + 1;
(strstr(line, " HTTP"))[0] = 0;
readRequest(requestString, RequestString);
}
}
break;
}
}
}
delay(2);
client.stop();
}
}
void readRequest(char *request, char *Request)
{
char inData[50];
char *requestString;
byte count = 0;
char *str;
char *p;
boolean invalidPass = true;
char *pass;
boolean terminador = false;
char credencial[50];
EthernetClient client = server.available();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[8]))); // "HTTP/1.1 200 OK"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[9]))); // "Content-Type: application/json"
client.println(buffer);
client.println();
pass = strtok(Request, ",");
base64_decode(pass, pass, strlen(pass));
base64_decode(credencial, Auth1, strlen(Auth1));
invalidPass = strcmp (pass, credencial);
requestString = strstr(request,",") + 1;
if (invalidPass == false)
{
for(int j = 0; j < strlen(requestString); j++)
{
if(request[j]!='K')
{
inData[j] = requestString[j];
}
if(requestString[j] == 'K')
{
inData[j] = '\0';
p = inData;
terminador = true;
while ((str = strtok_r(p, ",", &p)) != NULL)
{
inParse[count] = str;
count++;
}
}
}
}
if ((invalidPass == false) && (tentativa < maxima_tentativa) && (terminador == true))
{
tentativa = 0;
requestAction(atoi(inParse[0]));
}
else
{
tentativa++;
if(tentativa <= maxima_tentativa)
{
intervalo = millis();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[10]))); // "{\"response\":\"000\"}"
client.print(buffer);
}
else
{
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[11]))); // "{\"response\":\"001\",\"interval\":\""
client.print(buffer + String((intervalo_tentativa * 60) - ((millis() - intervalo) / 1000)) + "\"}");
}
delay(2);
client.stop();
}
}
void requestAction(byte ID)
{
byte cont = 0;
byte dia;
EthernetClient client = server.available();
float lunarCycle = moonPhase(t.year, t.mon, t.date); //get a value for the lunar cycle
switch (ID)
{
case 0: // Home
client.print(F("{\"theatsink\":"));
client.print(tempH);
client.print(F(",\"twater\":"));
client.print(tempC);
client.print(F(",\"tamb\":"));
client.print(tempA);
client.print(F(",\"waterph\":"));
client.print(PHA);
client.print(F(",\"reactorph\":"));
client.print(PHR);
client.print(F(",\"orp\":"));
client.print(ORP);
client.print(F(",\"dens\":"));
client.print(DEN);
client.print(F(",\"wLedW\":"));
client.print(LedToPercent(wled_out));
client.print(F(",\"bLedW\":"));
client.print(LedToPercent(bled_out));
client.print(F(",\"rbLedW\":"));
client.print(LedToPercent(rbled_out));
client.print(F(",\"redLedW\":"));
client.print(LedToPercent(rled_out));
client.print(F(",\"uvLedW\":"));
client.print(LedToPercent(uvled_out));
client.print(F(",\"unix\":"));
client.print(rtc.getTimeStamp());
client.print(F(",\"running\":"));
client.print(millis()/1000);
client.print(F(",\"speed\":"));
client.print(LedToPercent(fanSpeed));
client.print(F(",\"moonPhase\":"));
client.print(fase);
client.print(F(",\"iluminated\":"));
client.print(lunarCycle *100);
client.print(F("}"));
break;
case 1:
// Send{case, mode, association}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
byte numberOfDevices = 0;
float temperatura1 = 0;
float temperatura2 = 0;
float temperatura3 = 0;
sensors.begin();
numberOfDevices = sensors.getDeviceCount();
for(byte k = 0; k < numberOfDevices; k++)
{
// Pesquisar endereços
if(sensors.getAddress(tempDeviceAddress, k))
{
if (k == 0)
{
temperatura1 = sensors.getTempC(tempDeviceAddress);
for (byte i=0; i<8; i++)
{
sonda1[i] = tempDeviceAddress[i];
}
}
if (k == 1)
{
temperatura2 = sensors.getTempC(tempDeviceAddress);
for (byte i=0; i<8; i++)
{
sonda2[i] = tempDeviceAddress[i];
}
}
if (k == 2)
{
temperatura3 = sensors.getTempC(tempDeviceAddress);
for (byte i = 0; i < 8; i++)
{
sonda3[i] = tempDeviceAddress[i];
}
}
}
}
client.print(F("{\"number\":"));
client.print(numberOfDevices);
if(numberOfDevices < 2)
{
if(sonda_associada_1 == 1)
{
sonda_associada_2 = 0;
sonda_associada_3 = 0;
}
else if(sonda_associada_2 == 1)
{
sonda_associada_1 = 0;
sonda_associada_3 = 0;
}
else if(sonda_associada_3 == 1)
{
sonda_associada_1 = 0;
sonda_associada_2 = 0;
}
}
client.print(F(",\"p1\":"));
client.print(temperatura1);
client.print(F(",\"p2\":"));
client.print(temperatura2);
client.print(F(",\"p3\":"));
client.print(temperatura3);
client.print(F(",\"ap1\":"));
client.print(sonda_associada_1);
client.print(F(",\"ap2\":"));
client.print(sonda_associada_2);
client.print(F(",\"ap3\":"));
client.print(sonda_associada_3);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
sonda_associada_1 = atoi(inParse[2]); // 0,3,2,K
sonda_associada_2 = atoi(inParse[3]);
sonda_associada_3 = atoi(inParse[4]);
for(byte i = 0; i < 8; i++)
{
if(sonda_associada_1 == 1)
{
sensor_agua[i] = sonda1[i];
}
else if(sonda_associada_1 == 2)
{
sensor_agua[i] = sonda2[i];
}
else
{
sensor_agua[i] = sonda3[i];
}
if(sonda_associada_2 == 1)
{
sensor_dissipador[i] = sonda1[i];
}
else if(sonda_associada_2 == 2)
{
sensor_dissipador[i] = sonda2[i];
}
else
{
sensor_dissipador[i] = sonda3[i];
}
if(sonda_associada_3 == 1)
{
sensor_ambiente[i] = sonda1[i];
}
else if(sonda_associada_3 == 2)
{
sensor_ambiente[i] = sonda2[i];
}
else
{
sensor_ambiente[i] = sonda3[i];
}
}
contador_temp = 0;
temperatura_agua_temp = 0;
temperatura_dissipador_temp = 0;
temperatura_ambiente_temp = 0;
sensors.requestTemperatures(); // Chamada para todos os sensores.
tempC = (sensors.getTempC(sensor_agua)); // Lê a temperatura da água
tempH = (sensors.getTempC(sensor_dissipador)); // Lê a temperatura do dissipador.
tempA = (sensors.getTempC(sensor_ambiente)); // Lê a temperatura do ambiente.
SaveDallasAddress();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 2: //config date & time //Send (case, mode, date, month, year, hour, minute, second, day of week)
if(atoi(inParse[1]) == 0) // To save time and date send inParse[1] = 1
{
client.print(F("{\"date\":\""));
client.print(t.year);
client.print(F("-"));
client.print(t.mon);
client.print(F("-"));
client.print(t.date);
client.print(F("\",\"time\":\""));
client.print(t.hour);
client.print(F(":"));
client.print(t.min);
client.print(F(":"));
client.print(t.sec);
client.print(F("\"}"));
}
else
{
dia = validateDate(atoi(inParse[4]), atoi(inParse[3]), atoi(inParse[2]));
dia = validateDateForMonth(atoi(inParse[4]), atoi(inParse[3]), atoi(inParse[2]));
rtc.halt(true);
rtc.setDate(dia, atoi(inParse[3]), atoi(inParse[2]));
rtc.setTime(atoi(inParse[5]), atoi(inParse[6]), atoi(inParse[7]));
rtc.setDOW(calcDOW(atoi(inParse[4]), atoi(inParse[3]), atoi(inParse[2])));
rtc.halt(false);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 3:
if(atoi(inParse[1]) == 0) // Send (case, mode, values)
{
client.print(F("{\"hour\":"));
client.print(hora);
client.print(F(",\"minute\":"));
client.print(minuto);
client.print(F(",\"duration\":"));
client.print(duracaomaximatpa);
client.print(F(",\"monday\":"));
client.print(segunda);
client.print(F(",\"tuesday\":"));
client.print(terca);
client.print(F(",\"wednesday\":"));
client.print(quarta);
client.print(F(",\"thursday\":"));
client.print(quinta);
client.print(F(",\"friday\":"));
client.print(sexta);
client.print(F(",\"saturday\":"));
client.print(sabado);
client.print(F(",\"sunday\":"));
client.print(domingo);
client.print(F(",\"status\":"));
client.print(bitRead(tpa_status,2));
client.print(F("}"));
}
if(atoi(inParse[1]) == 1)
{
hora = atoi(inParse[2]);
minuto = atoi(inParse[3]);
duracaomaximatpa = atoi(inParse[4]);
segunda = atoi(inParse[5]);
terca = atoi(inParse[6]);
quarta = atoi(inParse[7]);
quinta = atoi(inParse[8]);
sexta = atoi(inParse[9]);
sabado = atoi(inParse[10]);
domingo = atoi(inParse[11]);
SalvartpaEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
if(atoi(inParse[1]) == 2)
{
bitWrite(tpa_status,2,atoi(inParse[2]));
Salvar_erro_tpa_EEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 4: //individual led test - load first values
if (atoi(inParse[1]) == 0) //Send (case, mode, wled, rled, rbled, rled, uvled)
{
client.print(F("{\"wLedW\":"));
client.print(wled_out);
client.print(F(",\"bLedW\":"));
client.print(bled_out);
client.print(F(",\"rbLedW\":"));
client.print(rbled_out);
client.print(F(",\"uvLedW\":"));
client.print(uvled_out);
client.print(F(",\"redLedW\":"));
client.print(rled_out);
client.print(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to change values
{
wled_out_temp = atoi(inParse[2]);
bled_out_temp = atoi(inParse[3]);
rbled_out_temp = atoi(inParse[4]);
rled_out_temp = atoi(inParse[5]);
uvled_out_temp = atoi(inParse[6]);
web_teste = true;
teste_led_millis = millis();
teste_em_andamento = true;
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
else if (atoi(inParse[1]) == 2)
{
web_teste = false;
teste_em_andamento = false;
ler_predefinido_EEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 5:
// Send{case, mode, color, first position}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"value0\":"));
for(byte i = 1 + atoi(inParse[3]); i < 9 + atoi(inParse[3]); i++)
{
client.print(cor[atoi(inParse[2])][i - 1]);
if(i < 8 + atoi(inParse[3]))
{
client.print(",\"value" + String(i - atoi(inParse[3])) + "\":");
}
}
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values temporarily
{
for (int i = atoi(inParse[3]); i < atoi(inParse[3]) + 8; i++)
{
cont++;
cor[atoi(inParse[2])][i] = atoi(inParse[3 + cont]);
}
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
else if (atoi(inParse[1]) == 2) // mode = 2 to save values to eeprom
{
SaveLEDToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
else if (atoi(inParse[1]) == 3) // mode = 3 to discard values
{
ReadFromEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 6: //moonlight
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"min\":"));
client.print(MinI);
client.print(F(",\"max\":"));
client.print(MaxI);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
MinI = atoi(inParse[2]);
MaxI = atoi(inParse[3]);
Salvar_luz_noturna_EEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 7: //fan led
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"minfan\":"));
client.print(HtempMin);
client.print(F(",\"maxfan\":"));
client.print(HtempMax);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
HtempMin = atof(inParse[2]);
HtempMax = atof(inParse[3]);
salvar_coolersEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 8: //reduce led power
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"templimit\":"));
client.print(tempHR);
client.print(F(",\"potred\":"));
client.print(potR);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
tempHR = atoi(inParse[2]);
potR = atoi(inParse[3]);
salvar_tempPotEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 9: //water temperature control
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"setTemp\":"));
client.print(setTempC);
client.print(F(",\"offTemp\":"));
client.print(offTempC);
client.print(F(",\"alarmTemp\":"));
client.print(alarmTempC);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
setTempC = atof(inParse[2]);
offTempC = atof(inParse[3]);
alarmTempC = atof(inParse[4]);
SaveTempToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 10:// dosage manual
// send (case, dosing pump selected, dose)
dosadora_selecionada = atoi(inParse[1]);
tempo_dosagem = map ((atof(inParse[2])*2), 0, fator_calib_dosadora[dosadora_selecionada], 0, 60000);
tempo_dosagem /= 2;
web_dosage = true;
client.print("{\"wait\":" + String((tempo_dosagem / 1000) + 10) + "}");
millis_dosagem = millis();
break;
case 11:// Calibration
if(atoi(inParse[1]) == 0)// send (case, mode, dosing pump selected)
{
dosadora_selecionada = atoi(inParse[2]);
config_valores_calib_temp();
client.print(F("{\"calib\":"));
client.print(fator_calib_dosadora[dosadora_selecionada]);
client.println(F("}"));
}
else if(atoi(inParse[1]) == 1)// send (case, mode, dosing pump selected) mode = 1 to dose
{
dosadora_selecionada = atoi(inParse[2]);
client.print(F("{\"wait\":70}"));
web_calibracao = true;
millis_dosagem = millis();
}
else if(atoi(inParse[1]) == 2)// send (case, mode, dosing pump selected, factor of calibration) mode = 2 to save
{
dosadora_selecionada = atoi(inParse[2]);
fator_calib_dosadora[dosadora_selecionada] = atof(inParse[3]);
fator_calib_dosadora_1 = fator_calib_dosadora[0];
fator_calib_dosadora_2 = fator_calib_dosadora[1];
fator_calib_dosadora_3 = fator_calib_dosadora[2];
fator_calib_dosadora_4 = fator_calib_dosadora[3];
fator_calib_dosadora_5 = fator_calib_dosadora[4];
fator_calib_dosadora_6 = fator_calib_dosadora[5];
Salvar_calib_dosadora_EEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 12:
if(atoi(inParse[1]) == 0) // Send (case, mode, dosing pump selected)
{
config_valores_dosadoras_temp();
config_valores_dosadoras_temp2();
dosadora_selecionada = atoi(inParse[2]);
client.print(F("{\"hStart\":"));
client.print(hora_inicial_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"mStart\":"));
client.print(minuto_inicial_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"hEnd\":"));
client.print(hora_final_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"mEnd\":"));
client.print(minuto_final_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"monday\":"));
client.print(segunda_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"tuesday\":"));
client.print(terca_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"wednesday\":"));
client.print(quarta_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"thursday\":"));
client.print(quinta_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"friday\":"));
client.print(sexta_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"saturday\":"));
client.print(sabado_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"sunday\":"));
client.print(domingo_dosagem_personalizada[dosadora_selecionada]);
client.print(F(",\"quantity\":"));
client.print(quantidade_dose_dosadora_personalizada[dosadora_selecionada]);
client.print(F(",\"dose\":"));
client.print(dose_dosadora_personalizada[dosadora_selecionada]);
client.print(F(",\"onoff\":"));
client.print(modo_personalizado_on[dosadora_selecionada]);
client.println(F("}"));
}
else if(atoi(inParse[1]) == 1) // Send (case, mode, dosing pump selected, values)
{
dosadora_selecionada = atoi(inParse[2]);
hora_inicial_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[3]);
minuto_inicial_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[4]);
hora_final_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[5]);
minuto_final_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[6]);
segunda_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[7]);
terca_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[8]);
quarta_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[9]);
quinta_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[10]);
sexta_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[11]);
sabado_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[12]);
domingo_dosagem_personalizada[dosadora_selecionada] = atoi(inParse[13]);
quantidade_dose_dosadora_personalizada[dosadora_selecionada] = atoi(inParse[14]);
dose_dosadora_personalizada[dosadora_selecionada] = atof(inParse[15]);
modo_personalizado_on[dosadora_selecionada] = atoi(inParse[16]);
config_valores_salvar_dosadoras();
criar_arquivos();
Salvar_dosadora_EEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 13: //PH control
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"setPHA\":"));
client.print(setPHA);
client.print(F(",\"offPHA\":"));
client.print(offPHA);
client.print(F(",\"alarmPHA\":"));
client.print(alarmPHA);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
setPHA = atof(inParse[2]);
offPHA = atof(inParse[3]);
alarmPHA = atof(inParse[4]);
SavePHAToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 14: // Calcium Reactor PH control
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"setPHR\":"));
client.print(setPHR);
client.print(F(",\"offPHR\":"));
client.print(offPHR);
client.print(F(",\"alarmPHR\":"));
client.print(alarmPHR);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
setPHR = atof(inParse[2]);
offPHR = atof(inParse[3]);
alarmPHR = atof(inParse[4]);
SavePHRToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 15: // ORP control
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"setORP\":"));
client.print(setORP);
client.print(F(",\"offORP\":"));
client.print(offORP);
client.print(F(",\"alarmORP\":"));
client.print(alarmORP);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
setORP = atoi(inParse[2]);
offORP = atoi(inParse[3]);
alarmORP = atoi(inParse[4]);
SaveORPToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 16: // Density control
// Send{case, mode, value}
if (atoi(inParse[1]) == 0) // mode = 0 to read values
{
client.print(F("{\"setDEN\":"));
client.print(setDEN);
client.print(F(",\"offDEN\":"));
client.print(offDEN);
client.print(F(",\"alarmDEN\":"));
client.print(alarmDEN);
client.println(F("}"));
}
else if (atoi(inParse[1]) == 1) // mode = 1 to save values
{
setDEN = atoi(inParse[2]);
offDEN = atoi(inParse[3]);
alarmDEN = atoi(inParse[4]);
SaveDENToEEPROM();
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
case 17:
break;
case 18:// Timers
if(atoi(inParse[1]) == 0)// send (case, mode, timer selec.)
{
temporizador = atoi(inParse[2]);
config_valores_timers_temp();
client.print(F("{\"hStart\":"));
client.print(on_hora[temporizador]);
client.print(F(",\"mStart\":"));
client.print(on_minuto[temporizador]);
client.print(F(",\"hEnd\":"));
client.print(off_hora[temporizador]);
client.print(F(",\"mEnd\":"));
client.print(off_minuto[temporizador]);
client.print(F(",\"activated\":"));
client.print(temporizador_ativado[temporizador]);
client.println(F("}"));
}
else if(atoi(inParse[1]) == 1)// send (case, mode, timer selected, values) mode = 1 to save
{
web_timer = true;
temporizador = atoi(inParse[2]);
on_hora[temporizador] = atoi(inParse[3]);
on_minuto[temporizador] = atoi(inParse[4]);
off_hora[temporizador] = atoi(inParse[5]);
off_minuto[temporizador] = atoi(inParse[6]);
temporizador_ativado[temporizador] = atoi(inParse[7]);
config_valores_salvar_timers();
salvar_timers_EEPROM();
bitWrite(temporizador_modificado,(temporizador + 1),1);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[7]))); // "{\"response\":\"ok\"}"
client.println(buffer);
}
break;
}
}
void dosagem_manual()
{
digitalWrite(dosadora[dosadora_selecionada], HIGH);
delay(tempo_dosagem);
digitalWrite(dosadora[dosadora_selecionada], LOW);
}
void calibrar()
{
digitalWrite(dosadora[dosadora_selecionada], HIGH);
delay(60000);
digitalWrite(dosadora[dosadora_selecionada], LOW);
}
void enviar_dados()
{
char dados[6];
EthernetClient client;
IPAddress joyreef(178, 255, 75, 58);
String OneString;
int ContentLength = 0;
OneString = Username;
ContentLength += OneString.length();
dtostrf(tempC,5,2,dados);
OneString = String(dados);
ContentLength += OneString.length();
dtostrf(tempH,5,2,dados);
OneString = String(dados);
ContentLength += OneString.length();
dtostrf(tempA,5,2,dados);
OneString = String(dados);
ContentLength += OneString.length();
dtostrf(PHA,5,2,dados);
OneString = String(dados);
ContentLength += OneString.length();
dtostrf(PHR,5,2,dados);
OneString = String(dados);
ContentLength += OneString.length();
OneString = String(DEN);
ContentLength += OneString.length();
OneString = String(ORP);
ContentLength += OneString.length();
OneString = String(rtc.getTimeStamp());
ContentLength += OneString.length();
ContentLength += 140;
Serial.println(F("Connecting..."));
if (client.connect(joyreef, 80))
{
Serial.println(F(">> Connected <<"));
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[0]))); // "POST /api/temp HTTP/1.1"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[1]))); // "Host: www.joy-reef.eu"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[2]))); // "Authorization: Basic "
client.print(buffer);
client.println(Auth1);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[3]))); // "Cache-Control: no-cache"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[4]))); // "Content-Type: application/x-www-form-urlencoded"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[5]))); // "Connection: close"
client.println(buffer);
strcpy_P(buffer, (char*)pgm_read_word_near(&(tabela_strings[6]))); // "Content-Length: "
client.print(buffer);
client.println(ContentLength);
client.println();
client.print(F("{\"userName\":\""));
client.print(Username);
client.print(F("\",\"minute\":\""));
client.print(rtc.getTimeStamp());
client.print(F("\",\"A\":")); // Temp. da água
client.print(dtostrf(tempC,5,2,dados));
client.print(F(",\"B\":")); // Temp. dissipador
client.print(dtostrf(tempH,5,2,dados));
client.print(F(",\"C\":")); // Temp. ambiente
client.print(dtostrf(tempA,5,2,dados));
client.print(F(",\"D\":")); // PH do aquário
client.print(dtostrf(PHA,4,2,dados));
client.print(F(",\"E\":")); // PH do reator de cálcio
client.print(dtostrf(PHR,4,2,dados));
client.print(F(",\"F\":")); // Densidade
client.print(DEN);
client.print(F(",\"G\":")); // ORP
client.print(ORP);
client.print(F(",\"H\":")); // Status chiller, 0 = desligado e 1 = ligado
client.print(bitRead(status_parametros,0));
client.print(F(",\"I\":")); // Status aquecedor, 0 = desligado e 1 = ligado
client.print(bitRead(status_parametros,1));
client.print(F(",\"J\":")); // Status reator de cálcio, 0 = desligado e 1 = ligado
client.print(bitRead(status_parametros,5));
client.print(F(",\"K\":")); // Status ozonizador, 0 = desligado e 1 = ligado
client.print(bitRead(status_parametros,7));
client.print(F(",\"L\":")); // Status reposição de água doce, 0 = desligado e 1 = ligado
client.print(bitRead(Status,1));
client.print(F(",\"M\":")); // Status niveis, 0 = baixo e 1 = normal
client.print(nivel_status);
client.print(F(",\"N\":")); // Status TPA, 0 = desligado e 1 = ligado
client.print(bitRead(tpa_status,0));
client.print(F(",\"O\":"));
client.print(bitRead(temporizador_status,1)); // Status timer 1, 0 = desligado e 1 = ligado
client.print(F(",\"P\":"));
client.print(bitRead(temporizador_status,2)); // Status timer 2, 0 = desligado e 1 = ligado
client.print(F(",\"Q\":"));
client.print(bitRead(temporizador_status,3)); // Status timer 3, 0 = desligado e 1 = ligado
client.print(F(",\"R\":"));
client.print(bitRead(temporizador_status,4)); // Status timer 4, 0 = desligado e 1 = ligado
client.print(F(",\"S\":"));
client.print(bitRead(temporizador_status,5)); // Status timer 5, 0 = desligado e 1 = ligado
client.print(F(",\"T\":")); // Sinaliza falha na TPA
client.print(bitRead(tpa_status,2));
client.println(F("}"));
delay(5);
client.stop();
}
else
{
Serial.println(F("Can't connect!"));
}
}also test code did not work for me just came back with server at 0.0.0.0.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#88
Wed Jan 07, 2015 4:33 am
Wed Jan 07, 2015 4:33 am
Posts: 61
Topics: 11 Solve rating: 1 Joined: Thu Aug 28, 2014 9:27 am Topics: 11
Age: 44 Location: England Gender: National Flag:
All looks similar to mine so not sure. Mine seems to have spaces after the , in the ip address and dns settings etc, don't know if that has anything to do with it. Have you also tried assigning a different ip like 192.168.0.24 etc. Does it work to log onto your router with 192.168.0.1?
Post Number:#89
Thu Jan 08, 2015 1:18 am
Thu Jan 08, 2015 1:18 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
Hello Guy,
I have the standard login for my router, tried adding in the spaces and no change, so I tried some thing else I tuned off my power supply and reset low and behold the IP changed again as soon as I reconnect every thing it goes back to server IP as 64.128.0.132. not sure what is going on or why.
-------------------------------- Last edited Wed Jan 07, 2015 10:21 pm --------------------------------
Hi Fernando.
Sorry I did not make it on this morning I got forced into working over and did not get home till well after noon my time.
I have the standard login for my router, tried adding in the spaces and no change, so I tried some thing else I tuned off my power supply and reset low and behold the IP changed again as soon as I reconnect every thing it goes back to server IP as 64.128.0.132. not sure what is going on or why.
-------------------------------- Last edited Wed Jan 07, 2015 10:21 pm --------------------------------
Hi Fernando.
Sorry I did not make it on this morning I got forced into working over and did not get home till well after noon my time.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#90
Sun Jan 11, 2015 6:06 am
Sun Jan 11, 2015 6:06 am
Posts: 61
Topics: 11 Solve rating: 1 Joined: Thu Aug 28, 2014 9:27 am Topics: 11
Age: 44 Location: England Gender: National Flag:
Hi Christopher,
Have you managed to get the webserver up and running yet?
Have you managed to get the webserver up and running yet?
Post Number:#91
Wed Jan 14, 2015 9:52 am
Wed Jan 14, 2015 9:52 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
No not yet I was very busy this weekend plus my wife is sick soI had the kkids. Going to try this evening if I have time.
-------------------------------- Last edited Wed Jan 14, 2015 6:52 am --------------------------------
No not yet I was very busy this weekend plus my wife is sick soI had the kkids. Going to try this evening if I have time.
-------------------------------- Last edited Wed Jan 14, 2015 6:52 am --------------------------------
No not yet I was very busy this weekend plus my wife is sick soI had the kkids. Going to try this evening if I have time.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#92
Fri Jan 16, 2015 9:57 am
Fri Jan 16, 2015 9:57 am
Posts: 61
Topics: 11 Solve rating: 1 Joined: Thu Aug 28, 2014 9:27 am Topics: 11
Age: 44 Location: England Gender: National Flag:
Sorry to hear about your wife, hope she is on the mend
Guy
Guy
Post Number:#93
Fri Jan 16, 2015 10:51 pm
Fri Jan 16, 2015 10:51 pm
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
Wife is all better now back to work she was sick for around three weeks, (brutal). any how Fernando I could sure use your help on this one. I noticed in one of the videos that you posted you are using 12 volt power, Any time I would use 12 volt power the board would start to have problems after a while and would get very hot even with a fan, that being said I have not used more than 9 volts. some of the issues I seam to be having are coming with the voltage changes 
I will be home around 10:00 or 11:00 tomorrow if can offer any advice that would be great Fernando if you have any thoughts of what would be the issue could you PM me thanks. 
I will be home around 10:00 or 11:00 tomorrow if can offer any advice that would be great Fernando if you have any thoughts of what would be the issue could you PM me thanks. Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#94
Fri Jan 16, 2015 11:01 pm
Fri Jan 16, 2015 11:01 pm
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Hi!
Low voltage on 5V circuit is related with overheating.
As you have a PC power supply you can use 5V connected directly on 5V pin and 12V separated to relay board. On this case the GND is common to both so, no problem.
Best regards.
Low voltage on 5V circuit is related with overheating.
As you have a PC power supply you can use 5V connected directly on 5V pin and 12V separated to relay board. On this case the GND is common to both so, no problem.
Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#95
Fri Jan 16, 2015 11:53 pm
Fri Jan 16, 2015 11:53 pm
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
wow Fernando you are up late thank you for the reply. Okay so ferduino is on a 5v line and an relay board is on a 5v line separate ground is common between the two, my relay board is only 5 volt not 12 volt, so all is good there. now a new issue if I unplug the USB from my pc ferduino tells to insert sd card witch is already installed. okay so I put in 4GB sd card and it worked fine also used VIN on db 25 and power issue went away. does it matter how the card is formatted.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#96
Sat Jan 17, 2015 12:13 am
Sat Jan 17, 2015 12:13 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Yes, because I need talk with chinese company and the difference of time is 10 hours 
.
If your relay board work with 5V you need use an external power supply because the Ferduino's regulator can supply only 800 mA. Unless that you connect the power supply directly on 5v and it will bypass the regulator.
If the voltage drop the 3.3V circuits will not work fine.
.If your relay board work with 5V you need use an external power supply because the Ferduino's regulator can supply only 800 mA. Unless that you connect the power supply directly on 5v and it will bypass the regulator.
If the voltage drop the 3.3V circuits will not work fine.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#97
Sat Jan 17, 2015 12:28 am
Sat Jan 17, 2015 12:28 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
I have the relay board on a 5v line from pc power supply. so it is not drawing power from ferduino.
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#98
Sat Jan 17, 2015 9:02 am
Sat Jan 17, 2015 9:02 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
Check the voltage on 5 V circuit when the USB is disconnected.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Post Number:#99
Sat Jan 17, 2015 10:56 am
Sat Jan 17, 2015 10:56 am
Posts: 274
Topics: 6 Images: 46 Solve rating: 0 Joined: Mon Sep 08, 2014 1:35 am Topics: 6
Age: 43 Location: Byers Gender: National Flag:
Is 4.78 volts
-------------------------------- Last edited Sat Jan 17, 2015 8:00 am --------------------------------
Is 4.78 volts
-------------------------------- Last edited Sat Jan 17, 2015 8:00 am --------------------------------
Is 4.78 volts
Happy reefing to all.
Christopher Kindig
Christopher Kindig
Post Number:#100
Sat Jan 17, 2015 11:57 am
Sat Jan 17, 2015 11:57 am
Posts: 1699
Topics: 38 Images: 301 Solve rating: 233 Joined: Mon Mar 03, 2014 5:59 pm Topics: 38
Age: 40 Location: São Paulo Gender: National Flag:
I had a problem with my ITDB32S and SD card.
I solved just adding a shunt on TFT to bypasses the regulator. See the image:
This happens because Ferduino have 3.3 V on TFT header and on TFT after the regulator the voltage is smaller so, the SD doesn't work fine.
But this problem doesn't happens with my ITDB32WD.
You can check the voltage on your TFT after the regulator and if needed add a shunt on pad called R4.
See the schematic:
http://itead-europe.com/pm/display/tft/ ... 02_4.3.pdf
I solved just adding a shunt on TFT to bypasses the regulator. See the image:
This happens because Ferduino have 3.3 V on TFT header and on TFT after the regulator the voltage is smaller so, the SD doesn't work fine.
But this problem doesn't happens with my ITDB32WD.
You can check the voltage on your TFT after the regulator and if needed add a shunt on pad called R4.
See the schematic:
http://itead-europe.com/pm/display/tft/ ... 02_4.3.pdf
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.
Return to Show your controller
Who is online
Users viewing this topic: SEMrush [Bot] and 20 guests