I once had all the modules and all accessories together and wanted to ask if it is possible to create a small list of what is controlled with what in Ferduino Board
so that my understanding grows.
there would be then
Osmosis regulation
water levels in the basin and in the technique the skimmer the dc pump all flow pumps dosing pumps temperature sensors various controllable aquarium LED lamps etc
This is what I’ve buy
- 4 pieces DIN 5 pin socket
- 1 piece 12 Volt power supply (Arduino)
- 1 piece Buzzer Module CP08014
- 1 piece of RFM12B radio modules
- 5 pieces RJ45 sockets
- 1 piece CD74HC4067 16 channel analog digital multiplexer
- 5 pieces DS18B20 temperature sensors
- 2 pieces BNC socket
- 1 piece PCF8575 remote 16 bit expander
- 2 pieces 12 volt relay
- 1 piece 3.2 "TFT touch screen
- 1 piece Arduino Shield
- 1 piece W5100 Ethernet shield
- 1 piece Arduino Mega 2560 R3
- 1 piece ADS1115 4 channel A / D converter
- 1 piece 3.2 "TFT shield
- 1 piece DS3231 RTC Clock
- 3 pieces screws shield
- 1 piece NodeMCU V3.2 ESP8266
- Various resistances
- 10 pieces latches plug
- 10 pieces jacks female
- 1 piece 8 channel logic level
- 1 PCA9685 16 Channel LED Controller
- 1 piece of NodeMCU shield
- Various hole grid boards