I am trying the elclient library with the esp-link firmware on a esp-12e and ferduino mega.
The module is connected through the serial1 port of arduino.
When I run the "webserver_control" example, (provided with elclient lib.)
This is a video i found on youtube that shows how it should work...
Watch on youtube.com
As in the above video, i can successfully switch on, off and blink a led connected on pin 13 from the esplink interface, but the other objects in the form don t work at all. In detail, i am talking about the frequency and duty cycle that are sent to the webserver with the "submit" button.
Same with the userpage.
Whatever is part of a form is not working.
Any idea about it?