Forum Members section DIY Ferduino controller Conflict tft shield/ethernet shield

Conflict tft shield/ethernet shield  [SOLVED]

Ask here about your controller made with pieces purchased in other shops.

Post Number:#1 Post Thu Jan 24, 2019 8:05 am
Posts: 14
Topics: 6
Images: 3
Solve rating: 0
Joined: Wed Dec 05, 2018 5:23 pm
Topics: 6
Age: 37
Gender: None specified
National Flag:
hi Fernando,
sorry for this post but I could not understand what changes I have to do at the ethernet shield.
I removed the pins 50,51,52,53 from the tft shield and unplugged the pins 10,11,12,13 of the ethernet shield.
on the code I enabled the sd on pin 53 and disabled pin 4.
unfortunately, however, I always have the inscription to insert the sd.
I can not understand how I can resolve this conflict

Post Number:#2 Post Thu Jan 24, 2019 9:43 am
Posts: 1560
Topics: 38
Images: 268
Solve rating: 209
Joined: Mon Mar 03, 2014 5:59 pm
Topics: 38
Age: 34
Location: São Paulo
Gender: Male
National Flag:


on the code I enabled the sd on pin 53 and disabled pin 4.

It's wrong!

For SD card on ethernet shield the SS pin is 4.

The code should be like this:

//#define USE_PIN_53_FOR_SD_CARD

Best regards.
Please do not PM me for support unless it is absolutely necessary.

I'll not write custom function to nobody unless you can pay for my job.

  • Similar Topics
    Last post

Return to DIY Ferduino controller

Who is online

Users viewing this topic: No registered users and 1 guest