Need a bit of Help (7.0" Screen) [SOLVED]

[Graeme Pearson]

Been trying to setup my Ferduino board with 7" screen using Willies code.
Everything works ok but have some probs with joy-reef, see the pic in red boxes.
No last time of reboot and the fan problem.
Anybody got any ideas or someone running the 7" screen on the Ferduino board want to post up their code so can have a look.
Thanks
mask0017

[Fernando Garcia]

Hi!

The Willie's version is outdated.

Missing other functions too.

Best regards.

[Graeme Pearson]

A ok, what the chances you could port the code to 7" screen then.
Must be a few of us with 7" and 5" screens that are missing out on the new functions now.
I'm not to good at coding or I would do it.
Maybe should add to the guide for 7" mod that code is outdated, wouldn't have got the screen if I'd known.
Thanks
mask0017

[Fernando Garcia]

You can find all changes on Github.

https://github.com/FernandoGarcia/Fedui ... its/master

[Graeme Pearson]

OK I look and try, but my last attempt at changing it resulted in high B.P. and smashed laptop.
kkl
mask0017

[Fernando Garcia]

You can send a pull request to help Willie.

https://help.github.com/articles/using-pull-requests/

[Graeme Pearson]

Done a rework of Willies 7.0" Screen code
Now have all the Joyreef working again .. Code updated to the latest Ferduino with Web control
Anybody need it just let me know
Some pics

mask0017

[Fernando Garcia]

Hi!

Thanks for your job.

Can you send the pull request to Willie's Github or create an account for you?

Best regards.

[Willie McDaries]

sorry I've been slacking at updating for the 7 inch screen, just been too busy......nice job Graeme Pearson, can I get a copy of your code ?

[Graeme Pearson]

PM sent
Well think it sent messaging a bit strange on here, let me know if it didn't come through and I put the link here

Thanks
mask0017

[Willie McDaries]

Graeme Pearson » Today 10:44 am wrote:

PM sent
Well think it sent messaging a bit strange on here, let me know if it didn't come through and I put the link here

Thanks
mask0017

thank you, yes I have it now...I'll try to get my github updated soon to your code so it will be there to download

[Willie McDaries]

Graeme Pearson, thank you again for you work, I think I have my github updated now, I added the Fahrenheit temp scale back for us USA people to mine but I don't think Joy Reef will work with it just yet, but here's my version https://github.com/willie111

I've been messing with the home screen looks some and I don't have an extra W5100 Ethernet module for testing yet...

Fernando I have issues with my LED bar graphs again and can't find the issue, I'd really appreciate if you could look at my code and see if you can find my problems

[Fernando Garcia]

Hi!

Check this lines in your old version.

https://github.com/willie111/Ferduino-7 ... c.ino#L342

https://github.com/willie111/Ferduino-7 ... .ino#L1812

https://github.com/willie111/Ferduino-7 ... .ino#L1833

https://github.com/willie111/Ferduino-7 ... .ino#L1854

https://github.com/willie111/Ferduino-7 ... .ino#L1875

https://github.com/willie111/Ferduino-7 ... .ino#L1896

https://github.com/willie111/Ferduino-7 ... .ino#L1924

And so on.

Best regards.

[Willie McDaries]

thank you Fernando, all my numbers seem to be correct but I'm missing something somewhere, I'm still searching for the issue

[Willie McDaries]

I got all the bar graphs fixed now and all the rest that Graeme Pearson didn't get updated, it's all done now and my github is up to date, I still don't have the Ethernet module to test it out but I'm almost positive it will work fine

Fernando, I finally figured out how you made the code so much smaller, nice job man