ESP8266 [SOLVED]

[Marmin Laurent]

Hello I am in esp8266 12f .. esp link works well it and well connected to ferduino. Com in the ferduino code I must entered ip 'Mac. Gw ...?
Thank you

[Fernando Garcia]

Hi!

No, just uncomment this line:

Code: Select all

// #define USE_ESP8266

After install the code open the serial monitor and set the baud rate to 38400 then check if ESP and Arduino are synced.

Best regards.

[Marmin Laurent]

Fernando Garcia » Yesterday 3:37 pm wrote:

Hi!

No, just uncomment this line:

Code: Select all

// #define USE_ESP8266

After install the code open the serial monitor and set the baud rate to 38400 then check if ESP and Arduino are synced.

Best regards.

Hello the serial monitor...

Code: Select all

There will be clouds today
There will be lightning today
Cloud schedule(0:0. 0:0.)
Cloud duration 9 minute
Lightning duration 5 minute
Free memory :4805

-------------------------------- Last edited Mon May 03, 2021 6:31 am --------------------------------

After that, there is no probe and no lighting connected to my arduino, can it be?

[Fernando Garcia]

Hi!

You have to leave the code in this way:

Code: Select all

#define ETHERNET_SHIELD

#define USE_ESP8266

Then look for this message on serial monitor:

Code: Select all

Syncing Arduino and ESP8266...
Synced!

Or

Code: Select all

Syncing Arduino and ESP8266...
Syncy failed!!

Is not needed connect probes to controller.

Best regards.

[Marmin Laurent]

Fernando Garcia » Today 8:18 am wrote:

Hi!

You have to leave the code in this way:

Code: Select all

#define ETHERNET_SHIELD

#define USE_ESP8266

Then look for this message on serial monitor:

Code: Select all

Syncing Arduino and ESP8266...
Synced!

Or

Code: Select all

Syncing Arduino and ESP8266...
Syncy failed!!

Is not needed connect probes to controller.

Best regards.

Thank you fernando for answering me I will review my connection diagram for Converter Bi-Directional Module 5V to 3.3V Arduino I ordered Experiment board I am coming back to tell you if it works
Salutations

[Fernando Garcia]

What's the reason to use ESP8266 12F instead NodeMCU? Are you doing a custom board?

The "experiment board" you are talking about is like this?

[Marmin Laurent]

Fernando Garcia » 35 minutes ago wrote:

What's the reason to use ESP8266 12F instead NodeMCU? Are you doing a custom board?

The "experiment board" you are talking about is like this?

Image: https://www.ferduino.com/forum/gallery/image.php?album_id=11&image_id=744

I thought that the nodemcu were the same as esp8266 12f for the plate experience

[Fernando Garcia]

Hi!

ESP8266 12F is the microcontroller used on NodeMCU.

This "experience plate" is more known as breadboard or protoboard.

Best regards.

[Marmin Laurent]

Fernando Garcia » Today 10:21 am wrote:

Hi!

ESP8266 12F is the microcontroller used on NodeMCU.

This "experience plate" is more known as breadboard or protoboard.

Best regards.

Thank you, Fernando, I learned something
Salutations

[Marmin Laurent]

Marmin Laurent » Tue May 04, 2021 3:17 pm wrote:

Fernando Garcia » Today 10:21 am wrote:

Hi!

ESP8266 12F is the microcontroller used on NodeMCU.

This "experience plate" is more known as breadboard or protoboard.

Best regards.

Thank you, Fernando, I learned something
Salutations

Hi fernando after reviewing my arduino nodemcu connection all function wonderfully thank you very much and great your workp

[Fernando Garcia]

Hi!

Glad to hear!

Best regards.